Learning how to read your eyeglass prescription makes it easier to order prescription glasses, compare an old prescription with a new one, and discuss lens choices with an optician. This plain-English guide explains SPH, CYL, axis, ADD, prism, pupillary distance, and expiration information, then shows what to check before ordering glasses or prescription sunglasses.
Overview
An eyeglass prescription is a set of measurements used to make lenses that address your refractive needs. It is not a diagnosis by itself, and it is not a measurement of how healthy your eyes are. A prescription may be printed on paper, sent electronically, or displayed in an optical store’s ordering system. The layout varies by region and provider, so the position of a number matters as much as the number itself.
Most prescriptions separate the right and left eyes. They may also list different values for distance and near vision, or include special instructions for progressive lenses, occupational lenses, or prism correction. Your prescription for glasses is also different from a contact lens prescription because contact lenses sit directly on the eye and require additional measurements.
Use the reference table below as a starting point. If a value is missing, unclear, or written in an unfamiliar format, ask the prescribing eye-care professional or an optician to confirm it rather than guessing.
| Term | What it means | How it is used |
|---|---|---|
| OD | Right eye | Identifies the measurements for the right eye. |
| OS | Left eye | Identifies the measurements for the left eye. |
| SPH or Sphere | The main lens power, shown with a plus or minus sign | Helps correct nearsightedness or farsightedness. A minus value commonly indicates nearsighted correction; a plus value commonly indicates farsighted correction. |
| CYL or Cylinder | The amount of astigmatism correction | May appear with a plus or minus sign, depending on the notation used. |
| Axis | The orientation of cylinder correction, expressed in degrees | Usually appears only when a CYL value is present. It describes direction, not strength. |
| ADD | Additional power for near tasks | Often used for bifocal, trifocal, or progressive lenses. It is generally added to the distance sphere power for the near portion. |
| Prism | A prescribed prism correction | May help address certain binocular-vision or eye-alignment needs. It can include a direction such as base up, base down, base in, or base out. |
| PD | Pupillary distance | Measures the distance between the pupils, or lists separate right and left distances for lens positioning. |
| Expiration date | The date through which the prescription is intended to be used | Requirements and terminology vary by location and provider. Confirm whether a current prescription is needed before ordering. |
What to track
Separate the right and left eye values
Read each column or row carefully. OD and OS are easy to confuse, particularly when a prescription contains similar numbers. Copy the values into a personal eyewear record exactly as written, including plus and minus signs, decimal points, and any prism direction. A missing sign can change the meaning of a lens power.
Check SPH, CYL, and axis together
SPH is the primary power. CYL and axis work together when astigmatism correction is included. Do not treat the axis as an additional power: it is an orientation from 1 to 180 degrees. If your prescription uses a different cylinder notation from an older prescription, an optician can explain whether the format has been transposed rather than assuming the prescription has changed dramatically.
Look for ADD and lens-design instructions
ADD is not usually a separate prescription for a second pair of distance glasses. It indicates additional near power for multifocal designs. If you are ordering progressive lenses, confirm that the retailer accepts the full prescription and can provide the required fitting measurements. A prescription alone may not contain every measurement needed to position progressive lenses accurately.
Confirm PD and fitting measurements
Pupillary distance may be printed on the prescription, provided separately, or measured by the eyewear store. Some prescriptions list one total PD; others list monocular PD values, such as the distance from the bridge center to each pupil. These are not interchangeable without checking the ordering system’s requirements.
Opticians may also take measurements such as fitting height, segment height, frame wrap, pantoscopic tilt, vertex distance, and bridge or temple fit. The exact measurements depend on the frame and lens design. This is especially relevant for progressive lenses, high-index lenses, strong prescriptions, and prescription sunglasses. For practical fit guidance, see How Should Glasses Fit? An Optician’s Frame-Fitting Checklist.
Record the date and source
Write down when the prescription was issued, which eye-care provider supplied it, and whether it is for single-vision distance, near, intermediate, or multifocal use. Keep the prescription with your eyewear records, but do not assume an older document remains usable indefinitely. An optician or eye-care professional can confirm whether it is still appropriate for a new order.
Cadence and checkpoints
Recheck your prescription information whenever you receive a new eye examination, prepare to order another pair, or compare a current prescription with an older one. A simple quarterly or annual eyewear check can also help you keep track of which glasses are for distance, reading, computer work, driving, or sun protection. The appropriate eye-examination schedule depends on individual circumstances, age, symptoms, and professional advice, so use your provider’s recommendation rather than a fixed calendar rule.
- Before ordering: Locate the complete prescription and check its date, OD and OS sections, plus and minus signs, CYL and axis values, ADD, prism, and PD requirements.
- When choosing a frame: Confirm that the frame is suitable for the prescription and intended lens design. A frame that works for one pair may not be suitable for a different progressive, high-index, or polarized lens order.
- During the fitting: Ask the optician to verify frame alignment, pupil positioning, bridge comfort, temple length, and any design-specific measurements. An in-person fitting can identify information that is not included on the prescription.
- After collection: Wear the glasses as instructed and note persistent blur, discomfort, distortion, slipping, pressure points, or difficulty adapting. Return to the optical store for an adjustment or verification rather than modifying the lenses yourself.
If you are ordering prescription sunglasses, compare the prescription details with the lens options separately. Tint, polarization, UV protection, lens material, and frame shape are product choices in addition to the prescription power. The guide to choosing prescription sunglasses explains those considerations.
How to interpret changes
A difference between an old and new prescription can reflect a change in measured refractive correction, a different notation style, or a different lens-use goal. Small changes should not be treated as a diagnosis or interpreted without context. Compare the complete prescription, not just the SPH number. Changes in CYL, axis, ADD, prism, or the balance between the two eyes can affect the finished lenses even when the sphere values look similar.
Never alter a prescription to make an online order work. Do not swap OD and OS, remove a minus sign, estimate PD, or calculate a new ADD unless a qualified professional has confirmed the result. Cylinder values can be written in different conventions, and a conversion needs to preserve the optical effect across the full prescription. If an order form asks for information that is not shown, contact the retailer or an optician.
Lens discomfort is not always caused by the prescription. Frame position, lens centration, adaptation to progressive lenses, coating reflections, lens material, and fit can all matter. If a new pair seems wrong, keep the glasses and order details, stop making self-directed changes, and ask the optical store to check the frame and lenses against the original prescription.
When to revisit
Return to this guide whenever you receive a new prescription, find an older pair in storage, move between regions with different prescription conventions, or prepare to buy prescription glasses or sunglasses online. Revisit your records when your daily visual needs change—for example, when you need separate computer glasses, reading glasses, safety eyewear, or a new multifocal design.
Before placing an order, use this final checklist:
- Match every value to the correct eye: OD or OS.
- Preserve all plus and minus signs, decimal points, and prism directions.
- Confirm whether the prescription is for distance, near, intermediate, or multifocal use.
- Check whether PD is included and whether separate monocular measurements are required.
- Ask which fitting measurements the optician must take for your chosen frame and lens design.
- Confirm the prescription date and any local ordering requirements with the provider or optical store.
- Have an optician verify unclear information before you submit the order.
For broader appointment preparation, use this eye exam and optician appointment checklist. Keeping an accurate, dated record makes future eyewear purchases easier while leaving clinical interpretation and prescription changes to your eye-care professional.